Coffee Drying, Where a Year’s Worth of Quality Is Lost in One Week

Taking freshly washed coffee to dry parchment takes seven to fifteen days in the sun, and in that time the bean can lose what cost an entire year in the field. Measuring moisture, managing the layer, and protecting the coffee at night make it possible to deliver dry, even parchment with no defects.

Coffee Drying, Where a Year’s Worth of Quality Is Lost in One Week

How do you know the coffee is already dry? On many farms, the answer is the same: you grab a handful, remove the parchment by hand, look at the color of the bean, and bite a grain. If it is hard and the color is the usual one, it gets bagged. The problem is that this test fails more often than it seems. In hundreds of samples taken on coffee farms, nearly four out of ten loads fell outside the moisture range required by the market, some because they were too dry and others because they were still wet. In more recent reviews, the proportion was still between one in four and four in ten.

There is more than a 97% probability that El Niño conditions will continue through the first quarter of 2027, with less rain and higher temperatures in much of the country. More sunny days may shorten drying, but they do not fix what is done wrong in the drying tunnel, and coffee that dries too fast and without control is damaged too.

In this blog we are going to talk about how much water has to leave the bean and why the 10 to 12% range is not arbitrary, what happens to coffee when it is dried too much, too little, or in interruptions, what changes between the drying tunnel, the silo, and the mixed dryer, and how to measure moisture on the farm without a lab and without biting the bean.

From the tank to dry parchment, how much water has to leave the bean

Washed coffee leaves the tank with about half its weight in water, and to be sold as dry parchment it has to reach 10 to 12% moisture. In farm kilos, out of every 100 kilos of washed and drained coffee, about 47 kilos are water, and what remains is what gets bagged. That water does not leave all at once: first the surface water goes, and then the water inside the bean, which is the hardest to remove.

In the sun, that work takes between 7 and 15 days, depending on temperature and rain, while in a silo with hot air it takes 25 to 30 hours. In the drying tunnel, the bean spends whole days at the mercy of the weather, heating up during the day and cooling at night, and each of those swings leaves a mark if it is not managed.

Why is the range exactly 10 to 12%? Because that is where the coffee settles down. With more than 11.5% moisture, the bean breathes faster, and that respiration keeps changing its chemistry even while it is stored in the sack. Below that range, the bean becomes brittle, loses color, and when it gets wet again in the warehouse or on the truck, it stains.

There is a more serious risk than cup quality. Some coffee fungi produce a toxic substance called ochratoxin, which buyers check for because it affects health. Those fungi begin to grow when green coffee has around 14% moisture, and they produce the toxin when the free water in the bean, the water fungi can use, stays in an intermediate range. Drying to 10 to 12% leaves the bean below that range.

International good-practice standards set the ceiling at 12.5% moisture and require that coffee not spend more than five days in the intermediate drying stage, when it is still damp but no longer wet, which is the stage that most favors those fungi. That intermediate stage is the one that gets longer when it rains, when the layer is too thick, or when drying is interrupted, and later I will come back to why interruption is worse than it seems.

Drying too much, too little, or in pieces, what happens to the bean

Every drying mistake leaves a defect with its own name, and cuppers recognize them. Coffee that stays too long in the dryer comes out discolored and over-dried. Coffee dried with air above 50 degrees ends up crystallized, with a glassy bean. Coffee that gets wet again after drying stains with streaks. And coffee left wet for days, or stored before it finishes drying, can come out black or with green mold, a blue-green fungus that shows up in the bean.

Interrupted drying is very common in the main harvest: the silo is loaded, turned off at night because no one is there to watch it, and turned back on the next day. In a trial that compared coffee dried without pause with coffee whose mechanical drying was interrupted for 12 to 48 hours, the coffee without interruption scored 81.15 points in the cup and showed no defects. When the pause went beyond 36 hours, defects became more frequent, especially an earthy flavor, and three of the interrupted treatments scored lower than the coffee without interruption.

The highest risk appears when the pause comes while the bean is still very wet. Interruptions with coffee above 40% moisture left the bean’s free water at levels that favor fungi. That is exactly the intermediate stage that good-practice standards ask to shorten. If the silo has to be turned off, it is better to do it at the end, when the coffee has already passed the hardest part, and not at the beginning.

In the drying tunnel, the pause takes another form: night. When the sun goes down, the air cools and its humidity rises to 100%, and the bean takes in moisture from the environment. That effect weighs more in areas with few hours of sun and becomes stronger when the coffee has already dropped below 20% moisture. That is why the tunnel windows are closed completely at night and on rainy days, and in the patio the coffee is piled up and covered after the first day.

Drying too much also has a cost. Over-dried coffee does not recover what was lost: if you try to give it moisture back, the bean whitens and the beans in the center of the pile can ferment. In addition, visual reading tends to overshoot, because the operator distrusts the dark bean and leaves it longer, when that color usually means the bean has already dropped below 10%.

Drying tunnel, silo, or mixed dryer, what changes with each one

The drying tunnel, or solar tunnel dryer, is the tool used on most farms, and its performance depends first on the sun. With identical dryers, in the coffee-growing zone with fewer hours of sun per year, drying took an average of 15.5 days, and in the zone with more hours it dropped to 10.6 days. It is the same tunnel with a five-day difference, and an El Niño year, with more clear hours, should bring farms closer to the shorter time.

What is placed over the dryer also matters. A black shade cloth that blocks 80% of the sun lengthens drying from 4.6 to 6.3 days, and it does not improve cup score.

Inside the drying tunnel, layer management is where the biggest gains are made. With the 2-centimeter layer normally used, only 2.7% of the bean surface receives direct sunlight; the rest depends on someone stirring it. That is why it is advisable to stir at least three times a day, and more on hot days. A rake designed for this, the Cenicafé-2, shortened drying by about 25% and left the moisture more even.

Coverings also age, and plastic that has become opaque from the sun dries a little more slowly each year. A modular drying tunnel with a polycarbonate cover, a rigid transparent plastic, dried the coffee in 112 hours, compared with 213 hours for the reference fabric dryer, almost half the time. In addition, that cover lasts several times longer than common plastic, which is replaced every two or three years.

For the farm that runs short of space during the main harvest, the mixed dryer combines daytime sun with a fan and a stove that burns husk or firewood. In its most complete version, which uses sun and hot air during the day and hot air at night, it dried in 75 hours what the reference solar dryer took 254 hours to dry, 70.5% less. Using only sun during the day and hot air at night, the savings were 45.8%. In this way, in the time of one sun-drying batch, more than three batches come out in the mixed dryer, and night stops being the moment when the coffee goes back.

In the silo, the risk shifts and the typical error is over-drying. Recommendations for mechanical drying are to keep the air below 50 degrees and turn the layer, or reverse the air direction, every six to eight hours. As we already covered in our blog Food Safety 4.0: Blockchain as the Digital Guardian of the Food Chain, which you can read here, every step in the chain that is recorded gives the buyer a reason to trust the product; in drying, that record is the entry date of each batch, the dryer it was in, the nights it spent there, and the moisture with which it came out.

Knowing how many days each batch has spent in the dryer

Do you know how many days the last batch took to dry, how many nights it spent in the drying tunnel, and with what moisture the coffee you sent to the cooperative came out? During the main harvest, batches from different days get mixed, the dryer is filled and emptied without writing anything down, and when a defect appears, no one knows which batch it came from anymore. Harvis helps you record from your phone the entry date of each batch, the dryer, the sample weight each day, and the exit date, and it alerts you when a batch has spent more days than normal in the wet stage or when it has already reached dry coffee weight. Write to us and we will set it up on the dryers and batches you already manage.

Measuring moisture without a lab and without biting the bean

The tooth test, the bean-color test, or splitting the bean with a blade give an idea, but they depend on the eye of the person doing them. What can be done on any farm is measuring with a scale. The principle is simple: coffee loses weight as it loses water, and the only thing that does not change is the solid part of the bean. If you know how much a sample weighed when it entered, you know how much it must weigh when it reaches 10 to 12%.

The Gravimet method is built on that principle. In its silo version, a one-liter container is filled with about 700 grams of washed and drained coffee, and it is left inside the layer. When that container drops to between 370 and 375 grams, the coffee has reached the target, with a difference of about half a moisture point compared with the lab.

In farm trials, 88.9% of the samples dried with this method fell within the commercial range, compared with 82.1% of those controlled with electric moisture meters. Those meters, which are widely used in buying and selling, tended to show less moisture than the real amount. That does not mean they are useless, but rather that they should be checked against a reference measurement at least once a year, before harvest.

For the drying tunnel, there is a version with four mesh baskets, each with 100 grams of washed coffee, which are weighed during drying. When the four together, which started at 400 grams, weigh between 210 and 212 grams, the coffee has reached 10 to 12%. To do this, all you need is a scale that measures gram by gram and a notebook.

There are two precautions to make the calculation work. The first is that the sample coffee must come from the same tank and the same batch as the rest, well drained and without pulp, because the method assumes the bean starts at about 53% moisture. The second is not to mix coffees from different harvest days in the same dryer, because each one moves at its own pace and the sample only speaks for its own batch.

Why another farm’s drying days are not yours

First, the times in this blog come from test dryers in specific areas. The 15.5 and 10.6 days came from two zones with different numbers of sun hours and identical dryers, and the 112 hours of the modular dryer came from five tests per zone in places with their own air temperature and humidity. An old tunnel, shaded by a tree, or next to a stream will take longer.

Second, the Gravimet figures assume washed coffee that starts between 52% and 53% moisture. If the coffee enters poorly drained, with pulp, or with tank water, the sample starts heavier and the target weight shifts. The calculation can be adjusted, but you need to know that the weight table does not work for just any coffee.

Third, natural and honey-processed coffees behave differently. They start with more water than washed coffee, and in mechanical drying they took an average of nine and six days, compared with four for washed coffee. In a Brazilian trial with natural coffee, one of the batches ended at 14% moisture, above the recommended ceiling. The figures in this blog are for washed coffee.

Fourth, none of these numbers can be copied exactly to another farm. What can be taken to any farm is the method: weigh a known sample, record the days and nights of each batch, and compare the result with the 10 to 12% range. After one harvest of recording, the drying days you use as a reference will be the ones from your own dryer.

One batch, one sample weighed each day, and the dryer notebook

Choose one batch from this week’s harvest, from a single picking day and a single tank. Before spreading it in the drying tunnel, fill four mesh baskets with 100 grams each of the same drained coffee, and place them inside the layer, in different spots in the dryer. Write down the date, time, and initial weight of the four together, which should be 400 grams.

Weigh them every day at the same time, mid-morning, and note the weight alongside the day’s weather: clear, cloudy, or rainy. Also note how many times you stirred the layer and whether you closed the windows at night. When the four together reach between 210 and 212 grams, the coffee is between 10 and 12% moisture and the batch can be removed. Write down how many days and how many nights it took.

With the second batch, change only one thing, for example stirring three times a day instead of two, or closing the windows every night. If the number of days goes down and the exit moisture stays in range, then you know what works for your dryer. By the end of the harvest, you will have the days your tunnel really takes with sun and with rain, and a way to know when to remove the coffee that does not depend on biting a bean.

Quality is harvested in the field and stored in the dryer

Coffee that comes out of the field well picked and well processed is still not safe. It still has to lose almost half its weight in water, and in those days it can gain defects it did not have: stains if it gets wet again, crystallized beans if it is overheated, earthy flavor if drying is cut short, fungi if it stays wet. Drying does not add quality to coffee, but it does decide how much of the quality it already had reaches the sack.

What you can do starting this week fits into five decisions. Weigh a sample from each batch instead of biting the bean. Stir the layer at least three times a day and close the tunnel at night and when it rains. Remove the black shade cloth if you have it over the dryer. Do not mix coffees from different days in the same dryer. And if you use a silo, do not turn it off while the coffee is still very wet.

The coffee grower who finishes this harvest with the dryer notebook will know how many days each batch needs and with what moisture their coffee comes out; the one who keeps using the tooth test will keep finding out about the defect when the buyer finds it first.

Do you want to know how many days each batch has spent in your dryer and when it reaches the right point, without relying on the tooth test? Write to us and we will show you how Harvis turns the scale and the dryer notebook into a record for each batch.

References consulted

  1. Oliveros Tascón, C. E., Peñuela Martínez, A. E. and Pabón Usaquén, J. P. (2013). Gravimet SM, technology to measure coffee moisture in silo drying. Cenicafé Technical Advances, 433. https://biblioteca.cenicafe.org/jspui/bitstream/10778/501/1/Avt0433.pdf
  2. Peñuela-Martínez, A. E., Rojas-Botina, W. F., López-Grisales, S. O., Tibaduiza-Vianchá, C., Rendón, C. D. and Guerrero, A. (2025). Use the Gravimet SM2 method to determine coffee moisture in mechanical drying. Cenicafé Technical Advances, 580. https://publicaciones.cenicafe.org/index.php/avances%5Ftecnicos/article/view/4317
  3. IDEAM (2026). IDEAM indicates that El Niño-type conditions continue to strengthen. Institute of Hydrology, Meteorology and Environmental Studies. https://www.ideam.gov.co/sala-de-prensa/noticia/ideam-indica-que-las-condiciones-tipo-el-nino-continuan-fortaleciendose
  4. Cenicafé (n.d.). Booklet 21, Coffee Drying. Coffee Booklets, National Federation of Coffee Growers of Colombia. https://www.cenicafe.org/es/publications/cartilla%5F21.%5FSecado%5Fdel%5Fcafe.pdf
  5. Osorio-Pérez, V., Pabón-Usaquén, J. P. and Gómez-Parra, C. R. (2026). Water activity and its influence on coffee quality. Cenicafé Technical Advances, 583. https://publicaciones.cenicafe.org/index.php/avances%5Ftecnicos/article/view/5051
  6. Codex Alimentarius (2009). Code of practice for the prevention and reduction of ochratoxin A contamination in coffee, CAC/RCP 69-2009. FAO and WHO. https://www.gov.si/assets/organi-v-sestavi/UVHVVR/Varna-hrana/Onesnazevala-v-zivilih/OTA-kava-CAC-RCP-69-2009.pdf
  7. Pabón Usaquén, J. and Osorio Pérez, V. (2022). Effect of interruption of mechanical drying on the physical and sensory quality of coffee. Revista Cenicafé, 73(2), e73201. https://doi.org/10.38141/10778/73201
  8. Guerrero-Aguirre, Á., Sanz-Uribe, J. R., Peñuela-Martínez, A. E. and Osorio-G., C. V. (2025). Coffee handling in solar drying. Cenicafé Technical Advances, 577. https://publicaciones.cenicafe.org/index.php/avances%5Ftecnicos/article/view/4247
  9. Duque Dussán, E. and Sanz-Uribe, J. R. (2025). Mixed dryer, integration of solar and mechanical drying for sustainable coffee production. Cenicafé Technical Advances, 572. https://publicaciones.cenicafe.org/index.php/avances%5Ftecnicos/article/view/3172
  10. Duque-Dussán, E., Ramírez, C. A., Sanz-Uribe, J. R., Londoño-Castañeda, J. A., López Grisales, S. O., Guerrero, A., Peñuela-Martínez, A. E. and Rojas-Botina, W. F. (2025). Modular solar coffee dryers, a sustainable, automated, and more durable alternative. Cenicafé Technical Advances, 575. https://publicaciones.cenicafe.org/index.php/avances%5Ftecnicos/article/view/4161
  11. de Abreu, D. J. M., Lorenço, M. S., Machado, G. G. L., Silva, J. M., de Azevedo, E. C. and Carvalho, E. E. N. (2025). Influence of drying methods on the post-harvest quality of coffee, effects on physicochemical, sensory, and microbiological composition. Foods, 14(9), 1463. https://doi.org/10.3390/foods14091463
← More posts
WhatsApp